EAL, Institut für elektrische Antriebe und Leistungselektronik

Institut für elektrische Antriebe und Leistungselektronik

JKU, Johannes Kepler Universität Linz

Sprache: DE

Publikations Einzelansicht

Design of a Highly Reliable Fan with Magnetic Bearings


Autor(en): Gerald Jungmayr, Hans-Jörg Berroth, Martin Panholzer, Edmund Marth, Wolfgang Amrhein, Frank Jeske und Martin Reisinger
Journal: ISMB14, 14th International Symposium on Magnetic Bearings, Linz, Austria, August 11-14, 2014
Jahr: 2014
Seite(n): 6 (42-47)
Datei / URL: http://www.magneticbearings.org/
Zusammenfassung: Long term analysis at ebm-papst St. Georgen GmbH & Co. KG showed that bearing failures are responsible for 90% of compact fan breakdowns. A magnetically levitated impeller has no contact with the stator and therefore the life expectancy can be essentially increased. This paper presents the design of a magnetically levitated fan. To meet the low-cost requirement, passive magnetic bearings (PMBs) are used to stabilize the radial and tilt deflections of the rotor. By applying an optimized viscoelastic support to the stator, sufficient damping is introduced to the passively stabilized degrees of freedom. The optimization of the stiffness and damping is discussed and the design of the key components, namely the PMB, the active magnetic bearing (AMB) and the passive damping device, is described. Finally the built prototype and measurements are presented.

« zurück